Why do you need to resurface your Florida swimming pool?

Why do you need to resurface your Florida swimming pool

Written by: Elajuwan R. Davis

October 13, 2020


Why should you resurface your Florida swimming pools?

As a homeowner, you will lose pride in your swimming pool when it has a shabby surface – it’s just not pleasing. Despite regular maintenance, the pool surface will eventually begin to age due to continuous use, tear, and wear. Look at it this way; the pool surface is submerged in chemicals year-round and frequently brushed to prevent algae; inevitably this causes wear after a while.

The truth is, pool surfaces are made to last 10 – 12 years, but this can vary based on how effectively you maintained your pool chemistry and how efficient the pool surface was installed. We recommend resurfacing your Florida swimming pool before significant problems such as cracks or filtration issues develop, therefore leaving no choice but to resurface.

Signs You Need To Resurface Your Florida Swimming Pool

To know whether your pool needs resurfacing, you first have to identify the signs that your swimming is showing. These signs can be easily observable or not. Here are eight signs that you need Florida pool resurfacing:

Erosion Marks

Erosion marks usually develop naturally on any surface where there is a flow of water over some time. For instance, think about how a stream flows from the mountains, the water slowly wears away the surface, thus forming a river. Obviously, your swimming pool is not facing this type of erosion. However, there is still friction of water against the pool surface resulting in visible wet spots.

The correct chemical balance is vital in preventing erosion. Without adding enough calcium levels, water will try to dissolve the pool surface.

Rough Spots

Does your swimming pool have rough areas on its floor? These spots can even graze your feet. Rough areas develop after some time when the pool surface is worn out. They can result from imbalanced chemical levels, unforeseen damage, or if the pool surface was not properly installed. You should quickly address rough areas for your safety and anybody else who uses your pool.

Discolored florida swimming pool

Surface Stains That Won’t Clean Off

Unremovable stains will reduce your pool’s lifespan, making it appear unattractive even though it is clean. Stains are a result of excess chemicals or the presence of metals in the water. Stains will also appear due to algae and when leaves are not cleared from the base of your pool.

Unexplained Water Level Decline

Have you noticed you are filling your pool more than usual? This may be a result of leaking. To find the leaks, you have to look for cracks, which are sometimes hard to see. The best way to remove the cracks is by resurfacing or replastering your pool.

Tile Grout Corroded

Pool surfaces made from tiles have a long lifespan – up to three times more than a standard plaster pool surface! However, they can start showing signs of aging and, in the end, can corrode if not appropriately addressed. If the pool tiles are not installed correctly, they will begin to pop off over time. Ruptured tiles can even cut you while swimming. Therefore it’s essential to resurface your Florida Swimming pool when you notice corroded tile grout.

Plaster Peeling or Flaking

Have you observed plaster peeled along the surface of your pool? This is caused by your pool having low chemical levels. There’s no other way to fix this other than resurfacing your pool.

Discolored Plaster

Your pool may have had a beautiful grey or blue colored finish, but due to discoloration, you can no longer recognize its initial beautiful color. Pool discoloration is caused by bleaching. To fix this, you have to resurface your pool.

Pool Resurfacing Options

Selecting the type of finishing on your pool surface mostly depends on your budget, taste, and backyard décor. Understanding the differences in each type of finishing and their advantages and disadvantages will help you in making your choice.

Plaster

This is the oldest and most common pool finish. It is made with a mix of cement, marble aggregate or sand, and water. It is usually installed with a trowel, making it simple and quick to install.

Advantages

  • It is affordable compared to other types of finishes.
  • It offers the typical classic swimming pool appearance.
  • It can be dyed in a range of colors.

Disadvantages

  • Trowel marks are usually visible in the finish.
  • It has a lifespan of only 5-10 years.
  • It is rough.
  • It can get damaged by imbalanced pool water.

Vinyl-lined

This is another popular type of finishing. It is similar to plaster in that it is available in a wide range of colors and creates a classic pool appearance. Although it is not the trendiest option, vinyl liners are family-friendly and practical.

Advantages

  • It is affordable.
  • It is resistant to stains.
  • It has low maintenance.
  • It can be easily refurbished.

Disadvantages

  • It has to be replaced after a few years.
  • It is very susceptible to algae growth.
  • Unbalanced chemicals can damage it.

Tile

There are several tile finishings, such as glass and porcelain. Tiles also come in many colors, designs, textures, and glazes to choose from. You can also mix different types of tiles to create an exclusive modified look for your swimming pool. If you want to get creative, this is the ideal pool finish option for you.

Advantages

  • With the ideal tile option, it can be highly resistant to damage from unbalanced pool water.
  • It is a durable finish.
  • There are many style options.
  • Tiles can magnify light.
  • Glass tiles do not stain easily.

Disadvantages

  • It can be expensive.
  • If not properly installed, tiles have sharp edges.
  • Tiles can break or chip.

Aggregate

This is the modern kind of plaster finishing. Generally, aggregate is similar to plaster but with other materials in the blend replacing sand. These materials can include glass beads, quartz, and pebbles. These materials form a pattern in the complete finish, adding depth and texture to your pool finishing. You must decide if you prefer a blended exposed appearance with a polished look or rough surface.

Advantages

  • It is more durable than plaster.
  • You can either choose a textured or flat surface.
  • It is resistant to stains.
  • It is more resistant to chemicals than other types of finishing.

Disadvantages

  • Glass beads fade after a few years.
  • Bare aggregate finishing is rough and hard to walk on.

If you want to upgrade your pool or your pool has exhibited the above signs that show wear and tear, you should consider Florida pool resurfacing. Keep in mind proper pool maintenance will make your pool maintain its attractive look and protect the pool surface, thus increasing its lifespan.


You May Also Like…

No Results Found

The page you requested could not be found. Try refining your search, or use the navigation above to locate the post.

0 Comments

Submit a Comment

Your email address will not be published. Required fields are marked *